INSTALLATION
To install, you will need screws appropriate for the type of wall you are mounting it on. A good option for most situations is #8 x35mm countersunk screws.
Firstly, put a screw through the top hole in the Universal Sleeve and into a wall stud to attach the sleeve to the wall. Then use a level on top of the sleeve to adjust the Universal Sleeve and then screw in the bottom; once attached to the wall, you can slide the rack arm into the channel on the sleeve.
Firstly, put a screw through the top hole in the Universal Sleeve and into a wall stud to attach the sleeve to the wall. Then use a level on top of the sleeve to adjust the Universal Sleeve and then screw in the bottom; once attached to the wall, you can slide the rack arm into the channel on the sleeve.